|
|
Cartidge seals are complete seal units
containing a gland, flush ports, sleeve, seal faces, o-rings, set screws, and gaskets.
Nothing is simpler to install or more reliable than a cartidge seal. |
|
|
1" cartidge style seal ASP
Style 13 SA ASP13SA-1000CS
Price:
$667.50 |
|
|
1.25" cartidge style seal
ASP Style 13 SA ASP13SA-1250CS
Price:
$673.00 |
|
|
1.375" cartidge style seal
ASP Style 13 SA ASP13SA-1375CS
Price:
$680.00 |
|
|
1.5" cartidge style seal ASP
Style 13 SA ASP13SA-1500CS
Price:
$692.00 |
|
|
1.625" cartidge style seal
ASP Style 13 SA ASP13SA-1625CS
Price:
$698.00 |
|
|
1.750" cartidge style seal
ASP Style 13 SA ASP13SA-1750CS
Price:
$660.00 |
|
|
1.875" cartidge style seal
ASP Style 13 SA ASP13SA-1875CS
Price:
$674.00 |
|
|
2" cartidge style seal ASP
Style 13 SA ASP13SA-2000CS
Price:
$785.00 |
|
|
2.125" cartidge style seal
ASP Style 13 SA ASP13SA-2125CS
Price:
$853.00 |
|
|
2.250" cartidge style seal
ASP Style 13 SA ASP13SA-2250CS
Price:
$1020.00 |
|
|
2.375" cartidge style seal
ASP Style 13 SA ASP13SA-2375CS
Price:
$1120.00 |
|
|
2.50" cartidge style seal
ASP Style 13 SA ASP13SA-2500CS
Price:
$1150.00 |
|
|
2.75" cartidge style seal
ASP Style 13 SA ASP13SA-2570CS
Price:
$1750.00 |
|
|
2.875" cartidge style seal
ASP Style 13 SA ASP13SA-2875CS
Price:
$1990.00 |
|
|
3" cartidge style seal ASP
Style 13 SA ASP13SA-3000CS
Price:
$1890.00 |
|
|
3.125" cartidge style seal
ASP Style 13 SA ASP13SA-3125CS
Price:
$1895.00 |
|
|
3.250" cartidge style seal
ASP Style 13 SA ASP13SA-3250CS
Price:
$1842.00 |
|
|
3.375" cartidge style seal
ASP Style 13 SA ASP13SA-3375CS
Price:
$1915.00 |
|
|
3.50" cartidge style seal
ASP Style 13 SA ASP13SA-3500CS
Price:
$1960.00 |
|
|
3.625" cartidge style seal
ASP Style 13 SA ASP13SA-3625CS
Price:
$2071.00 |
|
|
3.875" cartidge style seal
ASP Style 13 SA ASP13SA-3875CS
Price:
$2316.00 |
|
|
4" cartidge style seal ASP
Style 13 SA ASP13SA-4000CS
Price:
$2360.00 |
Our Style 13 SA seal
represents the finest in single seal cartridge seals. If you can
install packing you can install the ASP 13 SA quicker and easier
without pump modification*. The style 13 SA is designed for a wide
range of seal service applications.
Metal Components: 316 SS standard. Alloy 20 and Hastelloy C-276*
available Rotating Seal Face: P-658RC Carbon or Silicon Carbide
Stationary Seal Face: Silicon Carbide or Tungsten Carbide
Springs: Hastelloy C-276
O-Rings: Fluoroelastomer installed, EPDM supplied as alternate.
Aflas® or Kalrez® O-rings also available.
OPERATING LIMITS:
Pressure: 28 in (710 mm) Hg vacuum to 400 PSIG (28 bar) maximum,
depending on shaft size and speed.
Temperature: -20°F to 400°F (-30 C to 205°C)
with Viton O-rings;
-65°F to 300°F (-55°C to 150°C) with EPDM
*The ASP 13 SA seal fits all ANSI pumps which use 3/8" or larger
cross section packing and have at least a 1-1/2" deep stuffing
box with no modification to the pump required |
Aflas® is a registered symbol of Asahi Glass Co., Ltd.
Kalrez® is a Registered Trademark of DuPont Perfomance Elastomers
|